FactoryWiz Monitoring | 8.6 Licensing

8.6 Licensing
8.6.4 Current License Information
Here you can find your total number of licenses and how they are allocated to each machine type.
8.6.3 System Identification Codes
These 5 user keys are unique to each system. If you change hardware in your server, you may need your license to be re-issued as these codes could change.
8.6.2 Flex Allocation
On the left side, you can allocate the Flex licenses you have purchased to the machine types you will be monitoring. Use the red + and – buttons to increase or decrease the number of licenses to allocate to each machine type. On the right side, the ...
8.6.1 Managing Licenses
FactoryWiz Monitoring is licensed per machine, not by user or screen. Manage Licenses Here you can manage your licenses. You can add a license manually, reinitialize the system, and request a new license. Add License Add license is used to manually ...

Popular Articles
"DR Signal Off" Alarm (Often Alarm 086 on a Fanuc)
This alarm occurs when the CNC checks the data ready handshake line (sometimes called DR or DTR) and finds that the device is not ready. There are a few possibilities for this problem depending on how your cables are wired. Verify that your port is ...
Mazak M32 Configuration Document
CNC Parameters G1 = 2 (CMT 4800 baud) G19 - 2 (EIA 4800 baud) G20 - 3 (2 stop bits) G21 - 0 (even parity) G22 - 0 (Disable parity check) G23 - 3 (8 data bits) G27 - 0 (CR/LF) G29 - 3 (XON/XOFF) G30 - 1 (No DC Code parity check) G40 - 0 (No DC2/DC4) ...
Fanuc Part Count
Determining part counts for Fanuc machines Standard Machines (not looping the program) Fanuc machines will either part count on M30/M02 or a custom M code specified. To enable the machine to count on and M30/M02 parameter 6700#0(PCM) must be 0. If ...
Cable Diagrams and Descriptions with Pinouts
Pinout 1: No Handshake Jumper? DB-9 PC (Female) Wire DB-25 CNC (Male) Jumper? (Disconnected) Shield 1 2 (Receive Data) Green 2 (Transmit Data) 3 (Transmit Data) Red 3 (Receive Data) 5 (Signal Ground) Black 7 (Signal Ground) 4 (RTS) 5 (CTS) JUMPER 6 ...
Fanuc 10T Configuration Document
CNC Parameters Setting screen: Punch code- 1=ISO TV CHECK=0 OFF Under Service page: 0000 = xxx01000 (ISO) 0020 = 2 (Input device Foreground) 0021 = 2 (Output device Foreground) 0022 = 2 (Input device Background) 0023 = 2 (Output device Background) ...

FactoryWiz Monitoring | 8.6 Licensing | Knowledge Base