8.6.1 Managing Licenses
FactoryWiz Monitoring is licensed per machine,
not by user or screen.
Here you can manage your licenses. You can add a license manually, reinitialize
the system, and request a new license.
Add license is
used to manually copy paste the license code emailed to you from FactoryWiz.
This is only required if you do not have internet connection, thus stopping you
use Check Cloud license download.
This license is a long code sent by email as show in [FIGURE]
Reinitialize System
What does this actually do?
Send License Request
Add
screenshot here when it is fixed
The First Time Request is normally only used by a FactoryWiz
engineer, however if you do have to use it, please let us know that you have requested
a license by emailing support@factorywiz.com, this will speed up your request.
Check Cloud
Cloud Check will
check our servers for your license if you have used the First Time License
Request feature.
If a license is
available, it will automatically be installed on your system.
If you have just purchased additional
licenses, please click this once you receive receipt of invoice or PO.
Internet connection is
required for this feature to work.
Related Articles
8.6.4 Current License Information
Here you can find your total number of licenses and how they are allocated to each machine type.8.6.2 Flex Allocation
On the left side, you can allocate the Flex licenses you have purchased to the machine types you will be monitoring. Use the red + and – buttons to increase or decrease the number of licenses to allocate to each machine type. On the right side, the ...FactoryWiz Monitoring License Install (Existing Customers / New License)
Installing FactoryWiz Monitoring Licenses To install / download a new license sent from the FactoryWiz office, you will need to log into FactoryWiz with your admin credentials. Login as an admin Navigate to Licensing: CONFIGURATION > Licensing To ...Add Machine - Haas NGC Configuration for FactoryWiz
Haas NGC Configuration for FactoryWiz On the Haas CNC 1. Press Setting and move the tab to wired connection. Here you must set the machine IP and Subnet 2. Next go to SETTINGS tab and search for setting 143. Set 8000 to use TCP port 8000 for ...Troubleshooting Haas MDC (serial) Machines
Data collection for Haas MDC is performed in the DNC module. Haas CNC setting 143 must be enabled. Troubleshooting Haas MDC (serial) Machines Open the DNC Client Login as the admin Select the machine in question. Check the activity log for connection ...