Related Articles
Troubleshooting - Disconnected OperatorConnect
Toubleshooting Disconnected OperatorConnect When your OperatorConnect UI says DISCONNECTED, this is telling the machine is disconnected, not the tablet/pc you are using. If you see the OperatorConnect UI then it's working fine and the issue is with ...
9.3 How to Use the Tablet Widgets
Idle Reasons When the machine enters an idle status, the operator should input an idle reason. See System Settings to force an operator to input a reason on status change. See Idle Reason Configuration to add Idle Reasons. Current Idle Reason Click ...
Preparing for FactoryWiz Monitoring
Preparing for FactoryWiz Monitoring FactoryWiz Installation This document is to help you understand the preparation which is required to ensure that your system deployment goes as smoothly as possible. We want to make sure that you have a good ...
9.5 OperatorConnect Configuration (Operator Input)
1.1 Overview The operators tablet user interface is a highly customizable part of FactoryWiz. Allowing users to only see what they want to and only capture what they require. 1.2 Security One of the main challenges when deploying tablets to the shop ...
9.1 Overview
Overview The most efficient way of letting FactoryWiz know information about the “whys” (idle reason / operator / machine mode / etc) is to have the machine operator input the information on a Tablet mounted on their machine as they go about their ...