Sodick Mark-45 EDM Configuration

CNC Parameters

You will need to verify all parameters listed below that correspond to your CNC control.  These parameters may not match your particular machine’s control.  Document  (Phone camera) original settings before making modifications!

Hard coded to:

Baud: 4800

Data Bits: 7

Parity: Even

Stop Bits: 1

Handshake: RTS/CTS

FactoryWiz DNC Settings

Basic Communication

1.01- Port Type: Standard

1.11- Baud: 4800

1.12- Data Bits: 7

1.13- Parity / Code: ASCII Even

1.14- Stop Bits: 1

1.15- Handshake: RTS/CTS

1.21- End of Block:  CRLF

 

Sending Options

2.11- Leader:

2.12- Trailer: %<13><10>

2.23- Skip lines that contain: %

2.31- Automatic timeout: 7

 

Receiving Options

3.11- Program identifier 1: (

3.21- Receive timeout: 3

3.31- Ignore data before first end-of-block: False

3.32- Ignore data after last end-of-block: False

 

Outputting CNC Programs

***First line of program must be filename and must be in (), and no lower case characters in file.

Select Edit

Select More

Select SERIAL OUT

Press ENT

This will output the active file.

Inputting CNC Programs using the FactoryWiz Client:

Log into FactoryWiz Client and select the machine for file transfer.

Click on Send File.

Select the file to be sent, then click on Send File (Once)

At the Sodick control:

Select Edit

Select More

Select SERIAL IN

Press ENT.

Type in name of program to be stored.

Press ENT.

The selected program will now load.

 

Wiring Diagram

Pinout includes RTS/CTS Handshaking

	DB-9 com port	Wire color	DB-25 CNC	Jumper?
	(Disconnected)	Shield	1
	2 (Receive Data)	Green	2 (Transmit Data)
	3 (Transmit Data)	Red	3 (Receive Data)
	5 (Signal Ground)	Black	7 (Signal Ground)
	7 (RTS)	Brown	5 (CTS)
	8 (CTS)	Blue	4 (RTS)
			6 (DSR) 8 (DCD) 20 (DTR)	JUMPER

 

 

 

• Related Articles

• Haas Configuration

  CNC Parameters Newer Haas Press SETNG to bring up the machine settings. Press right arrow until you get to I/O tab. Press WRITE/ENTER button (lower right corner of panel). Use left and right arrow to toggle between choices for each setting. Press ...

• Moxa Configuration-Wizard (Wired)

  NPort 51xx Moxa Configuration NPort Windows Server 2019 and below or Windows 10 and below Driver Manager (WHQL certified) NPort Windows Server 2022 and above or Windows 11 and above Driver Manager (WHQL certified) Optional: NPort Search Utility You ...

• Brother C00 FTP Configuration

  CNC Configuration Sheet for FTP – Brother C00 You will need to verify all parameters listed below that correspond to your CNC control. Document (Phone camera) original settings before making modifications! CNC Parameters: Press EDIT button. Press ...

• Cincinnati 2100 Configuration

  CNC Parameters You will need to verify all parameters listed below that correspond to your CNC control. These parameters may not match your particular machine’s control. Document (phone camera) original settings before making modifications! Baud ...

• Yasnac I80 Configuration Document

  CNC Parameters You will need to verify all parameters listed below that correspond to your CNC control. These parameters may not match your particular machine’s control. Document (Phone camera) original settings before making modifications! Set the ...