Resolving Extra Characters Issue in Moxa Nport Serial Device

Moxa Nport Serial Device - Extra Characters

There is a known software issue with Moxa device driver v3.4.

This software issue adds extra characters to the CNC program. Only use v3.2 which you can download from here.

    • Related Articles

    • Moxa Configuration-Wizard (Wired)

      NPort 51xx Moxa Configuration NPort Windows Server 2019 and below or Windows 10 and below Driver Manager (WHQL certified) NPort Windows Server 2022 and above or Windows 11 and above Driver Manager (WHQL certified) Optional: NPort Search Utility You ...

    • Moxa Configuration Instructions-Wizard (Wireless)

      W2150A Wireless Moxa Configuration Below are a list of links to the latest drivers and firmware for the W2150A wireless Moxa units. Moxa Firmware Update NPort Windows Server 2019 and below or Windows 10 and below Driver Manager (WHQL certified) NPort ...

    • How to Change Your IP Address to One That Will Communicate with Your Serial Device Server

      How to change your IP Address to one that will communicate with your Serial Device Server | | Changing your computer IP address: Windows 7 Control Panel Double click on Network and Sharing Center You will see a Local Area Connection, Double Click on ...

    • Copying Moxa Configurations from Old Server to New Server

      Old server On the old PC, run the NPort Windows Driver Manager. Select Com Mapping. Click on Export. Click on Browse. Browse to the location where you would want to save the configuration. Type in the filename you want to save the configuration as. ...

    • Okuma P100, P200, P300 Serial Configuration

      Okuma OSP100, OSP200, and OSP300 CNC Parameters You will need to verify all parameters listed below that correspond to your CNC control. These parameters may not match your particular machine’s control. Document (phone camera) original settings ...