Milltronics Configuration
CNC Parameters
Parameters can be found by:
Use the arrow keys to get down the list to change/verify the parameters. (use the F3 key to toggle between the options.)
FactoryWiz DNC Settings
Basic Communication
1.11- Baud: 9600
1.12- Data Bits: 7
1.13- ASCII Even
1.14- Stop Bits: 2
1.15- Handshake: XON/XOFF
1.21- End of block (EOB) CRLF
Sending Options
2.11- Leader: %<13><10>
2.12- Trailer: %
2.23- Skip lines that contain: %
2.31- Automatic timeout: 7
Receiving Options
3.11- Program identifier 1: O
3.12- Program Identifier 2:
3.21- Receive timeout: 3
3.31- Ignore data before first end-of-block: True
3.32- Ignore data after last end-of-block: True
Remote Commands
4.02- Request for file command: GET-
4.03- Request for file command (drip feed): DNC-
4:11- Request to save command: PUT-
Outputting CNC Programs:
1). Press ESC until main menu appears.
2). Press F10 (Utilities).
3). Press F4 (RS232)
4). Press F5 (Send).
5). Press F1 (Text).
6). Press F7 (Menu).
7). Cursor to program for sending, and press F2 (Set).
8). Press START.
9). Press BEGIN.
Inputting CNC Programs:
1). Press ESC until main menu appears.
2). Press F10 (Utilities).
3). Press F4 (RS232).
4). Press F6 (Recv).
5). Press F1 (Text).
6). Type in PGM # and press ENTER.
Wiring Diagram: DB9 at hub, DB25 at machine
Pinout includes RTS/CTS Handshaking
DB-9 com port | Wire color | DB-25 CNC | Jumper? | |
| (Disconnected) | Shield | 1 |
|
| 2 (Receive Data) | Green | 2 (Transmit Data) |
|
| 3 (Transmit Data) | Red | 3 (Receive Data) |
|
| 5 (Signal Ground) | Black | 7 (Signal Ground) |
|
| 7 (RTS) | Brown | 5 (CTS) |
|
| 8 (CTS) | Blue | 4 (RTS) |
|
|
|
| 6 (DSR) 8 (DCD) 20 (DTR) | JUMPER |
Wiring Diagram: DB9 at hub, DB9 at machine
Pinout includes RTS/CTS Handshaking
DB-9 com port | Wire color | DB-9 CNC | Jumper? | |
| (Disconnected) | Shield | 1 |
|
| 2 (Receive Data) | Green | 3 (Transmit Data) |
|
| 3 (Transmit Data) | Red | 2 (Receive Data) |
|
| 5 (Signal Ground) | Black | 5 (Signal Ground) |
|
| 7 (RTS) | Brown | 8 (CTS) |
|
| 8 (CTS) | Blue | 7 (RTS) |
|
|
|
| 6 (DSR) 1 (DCD) 4 (DTR) | JUMPER |
Related Articles
Haas Configuration
CNC Parameters Newer Haas Press SETNG to bring up the machine settings. Press right arrow until you get to I/O tab. Press WRITE/ENTER button (lower right corner of panel). Use left and right arrow to toggle between choices for each setting. Press ...Moxa Configuration-Wizard (Wired)
NPort 51xx Moxa Configuration NPort Windows Server 2019 and below or Windows 10 and below Driver Manager (WHQL certified) NPort Windows Server 2022 and above or Windows 11 and above Driver Manager (WHQL certified) Optional: NPort Search Utility You ...Brother C00 FTP Configuration
CNC Configuration Sheet for FTP – Brother C00 You will need to verify all parameters listed below that correspond to your CNC control. Document (Phone camera) original settings before making modifications! CNC Parameters: Press EDIT button. Press ...Cincinnati 2100 Configuration
CNC Parameters You will need to verify all parameters listed below that correspond to your CNC control. These parameters may not match your particular machine’s control. Document (phone camera) original settings before making modifications! Baud ...Yasnac I80 Configuration Document
CNC Parameters You will need to verify all parameters listed below that correspond to your CNC control. These parameters may not match your particular machine’s control. Document (Phone camera) original settings before making modifications! Set the ...