Is my Haas a Next Gen Control (NGC)
Next Gen Control - NGC
The easiest way to find out if your Haas is a NGC, is to locate the network screen.
- Press the SETTINGS hardkey
- Use the arrows to navigate to NETWORK > WIRED CONNECTION
If you see the exactly same screen below then you have a NGC. Check complete.
Legacy Haas (Serial RS232)
- Press the SETTINGS hardkey
- Use the right arrow key to navigate the TABS until you see IO
Related Articles
Haas NGC DPRNT
HAAS DPRNT Configuration How to setup Haas NGC DPRNT to work with FactoryWiz In order to DPRNT data to FactoryWiz from a Haas NGC there are a things to set in both the CNC settings and FactoryWiz settings. Before you input any settings, you must ...Add Machine - Haas NGC Configuration for FactoryWiz
Haas NGC Configuration for FactoryWiz On the Haas CNC 1. Press Setting and move the tab to wired connection. Here you must set the machine IP and Subnet 2. Next go to SETTINGS tab and search for setting 143. Set 8000 to use TCP port 8000 for ...Haas NGC DPRNT Part Name and Part Count
For information on configuring the Haas and FactoryWiz with DPRNT, please see this KB Article. Part Name The default part name captured from the Haas NGC is the O number (example O01234). To capture something more meaningful, we can use DPRNT. Make ...Does my Haas have MACHINE DATA COLLECTION (MDC) - Setting 143
How to verify the existence of Setting 143 Standard Generation Control On Haas Control: Press the SETTNG hard key to display the machine’s settings page Page down and look for a setting numbered 143 with the text “MACHINE DATA COLLECT” The settings ...Troubleshooting Haas NGC Connection and DPRNT Test
This guide assumes you have setup the CNC settings and FactoryWiz in this KB Article. Ping Test We use a ping test to see if the server can see the Haas machine with its given IP address. In this example, our Haas has an IP of 192.168.0.19. See how ...