Monitoring & DNC Minimum Server Specifications
FactoryWiz Monitoring & DNC Minimum Specifications
Monitoring & DNC Minimum Server Specifications
FactoryWiz Monitoring Server
The following are the minimum and recommended specifications for computers running FactoryWiz Monitoring software.Minimum | Recommended |
Windows Server 2016 8 GB RAM 100 GB available hard drive space Ethernet LAN interface 1024x768 display | Windows Server 2016 or above 12 GB RAM 100 GB available hard drive space Ethernet LAN interface 1280x1024 display |
FactoryWiz DNC Server
The following are the minimum and recommended specifications for computers running FactoryWiz DNC software.
Minimum | Recommended |
Windows 11 4 GB RAM 16 GB available hard drive space Ethernet LAN interface 1280x1024 display | Windows Server 2016 or above 4 GB RAM 32 GB available hard drive space Ethernet LAN interface 1280x1024 display |
FactoryWiz DNC Client
Minimum | Recommended |
Windows 11 4 GB RAM 16 GB available hard drive space Ethernet LAN interface 1024x768 display | Windows 11 or above 2 GB RAM 32 GB available hard drive space Ethernet LAN interface 1280x1024 display |
We always recommend current Microsoft supported products for optimal security and performance.
Related Articles
Preparing for FactoryWiz Monitoring
Preparing for FactoryWiz Monitoring FactoryWiz Installation This document is to help you understand the preparation which is required to ensure that your system deployment goes as smoothly as possible. We want to make sure that you have a good ...FactoryWiz Monitoring Logout Timer
Monitoring Logout Timer How to change how long before FactoryWiz logs you out Remote access the FW server. Open IIS (internet information services) In the left tree, expand sites and select wwwroot2019 Select SESSION STATE In the cookie settings ...Configuring Mazak for Monitoring
Configuring Mazak Configuring Mazak for Monitoring In FactoryWiz Login as an Admin Navigate to CONFIGURATION > MACHINE ADD Input the name of the machine Set the machine type to Mazak Set IP address Save. Navigate to CONFIGURATION > LICENSING Increase ...Configuring Fanuc Focas for Monitoring
This guide is for the embedded ethernet (CD38A) not Data Server of Fast Board. Configuring Fanuc Focas for Monitoring FactoryWiz Login as an Admin Navigate to CONFIGURATION > MACHINE ADD Input the name of the machine Set the machine type to Fanuc ...FactoryWiz Monitoring License Install (Existing Customers / New License)
Installing FactoryWiz Monitoring Licenses To install / download a new license sent from the FactoryWiz office, you will need to log into FactoryWiz with your admin credentials. Login as an admin Navigate to Licensing: CONFIGURATION > Licensing To ...