Resolving CM7522 Error in Brother CNC with FactoryWiz: A Step-by-Step Guide

CM7522 Receive Command Abnormal End (0008)

Brother Troubleshooting

Brother CNC Control Software Troubleshooting

To eliminate this message, enable light polling mode (collects less data).

To enable:
  1. Log in to FactoryWiz as an admin
  2. Configuration
  3. Machine
  4. Select the machine you require
  5. Scroll to the bottom of the page to the advanced features.
    1. The feature name is LightBrother
    2. Machine specific = checked
    3. Value = 1
    4. Save
  6. Restart the RYM Brother services from the service once finished adding this to each machine.
This will disable program name folder changing, polling tool offsets and work offsets.





    • Related Articles

    • 10.1 DPRNT Command List

      If you DPRNT information to a service for the Okuma, Hurco or Mazak (not to the FactoryWiz DNC Server), here are a list of the commands. DPRNT Command Purpose Example START Set machine status as running START FINISH Set machine as idle and increment ...
    • 10.4 Data Dictionary

      Overview of Database Tables FactoryWiz is an open system, meaning we give users full access to all data for the purpose of writing custom applications and reporting solutions, as well as integrating with other business applications such as ERP ...
    • 8.7.9 Counting Parts

      The settings in the Counting Parts pane define when FactoryWiz™ Monitoring determines that a machine cycle is complete. These settings are extremely important; they directly affect the accuracy and validity of the information contained in automatic ...
    • Troubleshooting Haas NGC Connection and DPRNT Test

      This guide assumes you have setup the CNC settings and FactoryWiz in this KB Article. Ping Test We use a ping test to see if the server can see the Haas machine with its given IP address. In this example, our Haas has an IP of 192.168.0.19. See how ...
    • Haas NGC DPRNT

      HAAS DPRNT Configuration How to setup Haas NGC DPRNT to work with FactoryWiz In order to DPRNT data to FactoryWiz from a Haas NGC there are a things to set in both the CNC settings and FactoryWiz settings. Before you input any settings, you must ...