12.1.5 Chaning a Scene's Configuration
Changing a Scene's Configuration
You must unlock the screen before you can edit it.
After unlocking the screen each Scene will have a cog wheel button for configuration like the image below.
Click the "Edit Settings" Button and you will be brought to the Scene's configuration page.
Related Articles
12.2.9 Mini List View Scene
Overview The Mini List View scene displays the name, status, and mode for each machine. Configuration Mini List View can be configured to only show a specific Site, Department, or Group.Configuration
Configuration is done via Tablet.xml, which should be in the same file as the executable. The tablet is supposed to be hosted on a network shared folder, so configuration is done by PC station according to its hostname. Api The <Api> section is for ...8.2 Configuration - Cycle Times
You can upload cycle time and other information into FactoryWiz through the Configuration > Cycle Times option. When a machine registers a new part name (or job / op number, depending on how you have configured the machine), FactoryWiz will look in ...12.1.3 Adding Scenes
Adding a Scene You must unlock the screen before you can edit it. If you haven't already you must unlock the screen. To add a scene move the mouse to the top of the screen to display the options bar. Click the add widget button. You will be navigated ...Add Machine - Haas NGC Configuration for FactoryWiz
Haas NGC Configuration for FactoryWiz On the Haas CNC 1. Press Setting and move the tab to wired connection. Here you must set the machine IP and Subnet 2. Next go to SETTINGS tab and search for setting 143. Set 8000 to use TCP port 8000 for ...