Related Articles
How to Test a Connection Using a PING Test
Testing Network Connectivity How to Test a Connection Using a PING Test To check a CNC machines connection, you will need to know the IP address of the machine in FactoryWiz by going to CONFIG > Machine. In this example the ip address is 192.168.0.1 ...
Troubleshooting Haas NGC Connection and DPRNT Test
This guide assumes you have setup the CNC settings and FactoryWiz in this KB Article. Ping Test We use a ping test to see if the server can see the Haas machine with its given IP address. In this example, our Haas has an IP of 192.168.0.19. See how ...
Email History
Each time an email is sent, whether successfully or failed, a record will also show up in the Email Log History. This email History log represents a long-term retention of email history, while the Email Queue is a short-term retention of recent ...
Add machine - Siemens OPC-UA (v4.05) Monitoring Configuration
Adding Siemens OPC-UA (v4.05) for monitoring Pre checks 1. Check the machine has the required software version 4.05 [MENU SELECT] > {diagnostics} > {version}. 2. Check if the Access My Machine option is on (if it is not on then we can turn it on ...
8.11 Reports
FactoryWiz™ Monitoring can be configured to send automatic reports to selected users. Here you can add, modify, or delete automated reports. If any automatic reports have already been configured, they will be displayed on the left side of the Reports ...