Accessing the System via Web Browser

1.1 Accessing FactoryWiz

FactoryWiz is viewed and accessed using a web browser.

Enter the server name (or IP address) of the FactoryWiz server into the web browser address bar.

 

Figure 1‑1 Login Window

To access FactoryWiz, the device you are using will need to be on the same network as the FactoryWiz server.  Contact your system administrator to create an account if you do not have one. For external access to FactoryWiz, you might require a VPN connection. Please contact your IT department for further information on how to access externally.

Here you can also see the software version you have installed, which is shown directly below the login button. Users can also switch between light and dark mode by using the toggle switch in the upper right corner of the login screen.


    • Related Articles

    • Preparing for FactoryWiz Monitoring

      Preparing for FactoryWiz Monitoring FactoryWiz Installation This document is to help you understand the preparation which is required to ensure that your system deployment goes as smoothly as possible. We want to make sure that you have a good ...

    • FactoryWiz ERP Integration

      FactoryWiz is an open system, meaning it provides opportunities for bidirectional communication with other systems. In the FactoryWiz manual there is a Data Dictionary section which highlight the data you will want to capture, as well as Data ...

    • FactoryWiz Monitoring Logout Timer

      Monitoring Logout Timer How to change how long before FactoryWiz logs you out Remote access the FW server. Open IIS (internet information services) In the left tree, expand sites and select wwwroot2019 Select SESSION STATE In the cookie settings ...

    • How to Restart FactoryWiz Services

      FactoryWiz talks to most machine controls (CNC / PLC) with a dedicated windows service for each control type. By that we mean all Fanuc's are controlled by one service (RYM FOCAS) and all Mazak's controlled by another service (RYM Mazak). A lot of ...

    • Receiving Blank or Unknown Emails From FactoryWiz

      Email Troubleshooting Email Configuration Settings To find out where emails are being sent from, go to the MySql console in FactoryWiz CONFIG > Database > Console. Run the following command: select * from emailqueue order by eqadded desc limit 100 ...